Home Home Improvement All about Roof Load, Roof Pitch Etc of A Mobile Home

All about Roof Load, Roof Pitch Etc of A Mobile Home

by Lulu Beier

Eaves and roof pitch have an often neglected (literally) element of your new mobile home. Despite the fact all prefabricated houses have created in a factory. Not all roof pitches are the same!

Modular dwellings, for example, frequently have a 5/12 roof pitch. This is significant because local governments may have strict construction rules that restrict the angle of your roof.

They may prevent you from installing or moving into your new house when you try to get in a mobile home that does not meet the legal minimum for a roof pitch. Therefore, before you look for ground level storage, let’s begin!


A one-foot eave would prefer a smaller prefabricated home (under 1500 square feet). But a 6″ eave is preferable to no eave at all. Most houses seem like a cheap box without eaves. A 16″ eave gives a more prominent home a more substantial appearance.

So, sometimes the shipping width of a prefabricated home or a piece of a home prevents the addition of eaves. But eaves can be purchased as separate units and installed on-site.  Eaves may not be an option for some lower-priced homes. And the grey one would undoubtedly look well with them. Alike as eaves, you can also buy ground level storage units.

Roof Pitch

The pitch of a roof indicates how steep it is. And it is measured in inches, with a 3/12 pitch indicating a 3″ vertical rise for every foot (12″) of the roof. In locations with a lot of snow, insurers may need at least a 4/12 pitch on your roof.

A steeper roof of 4/12 or higher will help make a prefabricated home appear more like a traditional residence. Many prefabricated houses have been built with a 3/12 roof pitch, although some may be altered to 4/12, 5/12, or higher.

5/12 pitches have often seen exclusively on modular homes with hinged roofs. So, they allow them to move under height restrictions. The roof is flat, and it has lifted onto the site using a crane.

Roof Load

Increasing the roof’s strength so that it can support additional weight is accomplished by adding rafters rather than roofing material or sheathing. This is something like to keep in mind if you live in a snowy environment.

Homes in non-snowy climates often have a roof load capability of 20 lb. or 30 lb. So, a 90 lb. roof has recommended in heavy snow locations were there may be 5/6 feet of snow on the roof. Upgrade to the 50 lb. roof in locations where you could receive 2 or 3 feet of snow.

The Bottom Line

One final note about roof pitch: safety. If you acquire a metal roof with a pitch of 5/12 or higher, it won’t seem as safe as a lower-pitched roof, especially if you prefer to climb up on your roof to remove branches or do minor patching around exhaust pipes.

So, it is critical to ensure that you have sufficient finances to handle unforeseen occurrences. Too many times, we’ve seen purchasers blow their budget, only to fall behind on their loan payments as soon as anything comes up. So, take preparation for the unexpected!

You may also like

ContributionBlog: Your platform for diverse content on news, health, tech, education, politics, entertainment, sports, and more. Join the conversation today!

Copyright @2024 – All Right Reserved. Designed and Developed by ContributionBlog